Top Menu

Medium 2-screw pan handle

$11.99

Material: Bakelite, stainless steel

Includes: Two handle halves + hardware set

Measurements: 4.6 in (117 mm) long, 2.6 in (66mm) between holes on center.  Fits a metal spline approximately 5/8 in tall.  See the full details for more information on determining the proper size handle, or download and print our sizing sheet on an 8 1/2 x 11 (letter size) sheet of paper.

Fits: Vintage era 5 ½ in and 6 in pans, 7 in skillets, and possibly others (definition of skillet, pan, etc. here). These fit Revere Ware pans with handles that have two screws through the Bakelite.

Please see the detailed information about this part to see any special considerations for this part and ways in which they differ from original Revere Ware parts.

In stock

Description

These are medium sized replacement handles for vintage era Revere Ware pans.  Please use the information below and the pictures to make sure they will fit your pan before you buy. These parts are newly manufactured by reverewareparts.com and are made to look and work just like original Revere Ware handles.

SKU: VPAH-M
UPC Code: 898746002033

Material: Bakelite, stainless steel

Includes: Two handle halves + hardware set

Measurements: 4.6 in (117 mm) long, 2.6 in (66mm) between holes on center.  Fits a metal spline approximately 5/8 in tall.

Fits: Vintage era 5 ½ in and 6 in pans, 7 in skillets, and possibly others (definition of skillet, pan, etc. here).  These fit Revere Ware pans with handles that have two screws through the Bakelite.

These handles will only fit a 5/8 in tall metal spline.  If the metal spline of your pan is 3/8 in you need the small handle size.  If the metal spline of your pan is 3/4 in you need the large or x-large handle size.

The screw and barrel nut in the hardware set included with this handle are a different thread pattern than original Revere Ware hardware and are not interchangeable with original hardware parts.

How to determine the proper size handle:  We sell small, medium, large, and x-large size of this style 2-screw handle.  It is fairly straight-forward to determine the proper size handle based on the height of the metal spline (the metal part the two handle halves go around) , the distance between the centers of the two holes, and the overall length of the Bakelite part of the handle.  If you check your measurements and cant’ find a match, please contact us to ask for help before purchasing.

Size Metal spline height Distance between hole centers Overall Bakelite length
Small 3/8″ 2.75″ 4.5″
Medium 5/8″ 2.6″ 4.6″
Large 3/4″ 3.1″ 5.25″
X-Large 3/4″ 3.7″ 5.7″

You can also download and print our sizing sheet on an 8 1/2 x 11 (letter size) sheet of paper to hold up to your old handle to determine the proper size.

Replaces:  Revere called this handle style “Style No. 2” and “2-screws”.  The original Revere part number for this handle (medium size) was 36006.  It also had an older part number of the 629.

Hardware Notes

The screws in the hardware set are Phillips head, not slotted like the original Revere Ware screw sets were. Because the original slot head screws strip very easily, we consider this an improvement.

Bakelite Notes

Bakelite
is a great heat resistant material, but it can be a bit brittle. The most important thing is to not over tighten the screws when assembling the pan handle or you can crack the handle.

It is generally not a good idea to put Bakelite parts in the oven; it can make them dull or in some cases crack.  We do not offer our Bakelite parts as oven-safe.

It is generally not a good idea to put Bakelite parts in the dishwasher; the soap will eventually dull and dry out the surface of the Bakelite.  We do not offer our Bakelite parts as dishwasher-safe.

Installation Notes

When removing your hanging loop from the old pan handle, first remove the handle from the pan. Then, if you open the loop up just a little bit with a pair of pliers, you can slide one half of the handle out, and then the other half. Before you put the new handles on, put the hanging loop in one half of the handle, then slide the other half in and squeeze the loop closed a little. You will find it much easier to put the loop on before attaching the handle to the pan than after.

We have seen about 5% of handles where the screw holes are off just enough to make it very hard to get the nuts to go all the way through. The is just a natural variation in the original Revere manufacturing process. Widening the hole slightly with a drill or file has fixed every one of these for us.

In some cases, the old screws can rust together and are very hard to get off. Twisting the screw also twists the nut on the other side. You can try pressing a slotted screwdriver between the edge of the nut and the Bakelite to create some resistance to keep the nut from turning, but if it is truly corroded, the only real solution we’ve found is to break the Bakelite off by prying between the two halves with a screwdriver. Once the Bakelite is off, you can grab the nut with pliers.

Troubleshooting

In some cases the longer nut and screw may bottom out before being completely tight on the far hole (near the hanging loop) of the medium pan handle.  The solution is either to add a washer or to grind the screw down slightly, about 1/6 of an inch.

Additional information

Weight 3 oz
Dimensions 5 × 2 × 1 in

You may also like…

  • X-Large 2-screw pan handle

    X-Large 2-screw pan handle

    Material: Bakelite, stainless steel

    Includes: Two handle halves + hardware set

    Measurements: 5.7 in (145 mm) long, 3.7 in (95 mm) between holes on center.  Fits a metal spline approx 3/4 in tall.  See the full details for more information on determining the proper size handle, or download and print our sizing sheet on an 8 1/2 x 11 (letter size) sheet of paper.

    Fits: Vintage era 8 in pans, 10 in & 12 in skillets, 10 in square skillets, large griddles, and possibly others (definition of skillet, pan, etc. here).  These fit Revere Ware pans with handles that have two screws through the Bakelite.

    Please see the detailed information about this part to see any special considerations for this part and ways in which they differ from original Revere Ware parts.

    Details
    $11.99 Add to cart
  • Pan/skillet 2-screw handle hardware set (med, lg, x-lg handles)

    Pan/skillet 2-screw handle hardware set (med, lg, x-lg handles)

    Material: Stainless steel

    Includes: Two nuts, two screws, and a hanging hook

    Fits: Vintage era medium, large, and x-large skillet and pan handles (definition of skillet, pan, etc. here).  These fit Revere Ware pans with handles that have two screws through the Bakelite.

    If you are looking for a new hardware set for your 2-screw Revere Ware handle, this is mostly likely the one you need; this set fits 99% of all the 2-screw handles. This hardware set is specifically made for the medium, large, and x-large sized handles. We also sell a small hardware set which only fits the small handle; the small handle fits very very few cookware pieces.

    Please see the detailed information about this part to see any special considerations for this part and ways in which they differ from original Revere Ware parts.

    Details
    $4.99 Add to cart
  • Lid knob

    Lid knob

    Material: Bakelite, brass

    Includes: Bakelite knob with brass screw insert.  A separate screw is NOT included as all Revere lids have a screw attached to them.

    Measurements: 1.7 in (43 mm) diameter, 0.75 in (19 mm) tall

    Fits: All Revere Ware lids, vintage era and newer that have a similar looking knob.  This knob may not fit Revere Ware lid styles that have a different looking knob.

    Details
    $6.49 Add to cart
  • Large 2-screw pan handle

    Large 2-screw pan handle

    Material: Bakelite, stainless steel

    Includes: Two handle halves + hardware set

    Measurements: 5.25 in (130 mm) long, 3.1 in (79 mm) between holes on center.  Fits a metal spline approx 3/4 in tall.  See the full details for more information on determining the proper size handle, or download and print our sizing sheet on an 8 1/2 x 11 (letter size) sheet of paper.

    Fits: Vintage era 7 in pans, 8 in skillets, 9 in square skillets, and possibly others (definition of skillet, pan, etc. here).  These fit Revere Ware pans with handles that have two screws through the Bakelite.

    Please see the detailed information about this part to see any special considerations for this part and ways in which they differ from original Revere Ware parts.

    Details
    $11.99 Add to cart
  • Small 2-screw pan handle

    Small 2-screw pan handle

    PLEASE DO NOT ORDER THIS HANDLE SIZE UNLESS YOU ARE SURE IT WILL FIT YOUR PAN!  SEE THE MEASUREMENTS BELOW (ESPECIALLY THE SPLINE SIZE).  THIS SIZE FITS VERY FEW PAN SIZES.

    Material: Bakelite, stainless steel

    Includes: Two handle halves + hardware set

    Measurements: 4.5 in (115 mm) long, 2.75 in (70 mm) between holes on center.  See the full details for more information on determining the proper size handle, or download and print our sizing sheet on an 8 1/2 x 11 (letter size) sheet of paper.

    Fits: Vintage era 6 in skillets, and possibly others (definition of skillet, pan, etc. here).  These fit Revere Ware pans with handles that have two screws through the Bakelite.

    These fit a limited number of pans/skillets and fit a 3/8 in metal spline that is smaller than the 5/8 (medium handle) or 3/4 in spline (large, x-large) most Revere Ware skillets and pans have.  Please make sure your pan has the smaller spline these handles are made for.

    Please see the detailed information about this part to see any special considerations for this part and ways in which they differ from original Revere Ware parts.

    Details
    $11.99 Add to cart