10-12 in, 10-in Square
The recommendations for handle size based on the measurements of your skillet are suggestions only.
To insure a proper fit, please check the the stated measurements for our parts against your existing handle. Specifically, check the measurements of the Bakelite part of the handle, the distance between the centers of the holes, and the size of the metal spline the handle goes on to insure a proper fit. The spline measurements and the distance between the holes are the most critical measurements to pay attention to.
Showing all 3 results
-
Lid knob
DetailsMaterial: Bakelite, brass
Includes: Bakelite knob with brass screw insert. A separate screw is NOT included as all Revere lids have a screw attached to them.
Measurements: 1.7 in (43 mm) diameter, 0.75 in (19 mm) tall
Fits: All Revere Ware lids, vintage era and newer that have a similar looking knob. This knob may not fit Revere Ware lid styles that have a different looking knob.
-
X-Large 2-screw pan handle
DetailsMaterial: Bakelite, stainless steel
Includes: Two handle halves + hardware set
Measurements: 5.7 in (145 mm) long, 3.7 in (95 mm) between holes on center. Fits a metal spline approx 3/4 in tall. See the full details for more information on determining the proper size handle, or download and print our sizing sheet on an 8 1/2 x 11 (letter size) sheet of paper.
Fits: Vintage era 8 in pans, 10 in & 12 in skillets, 10 in square skillets, large griddles, and possibly others (definition of skillet, pan, etc. here). These fit Revere Ware pans with handles that have two screws through the Bakelite.
Please see the detailed information about this part to see any special considerations for this part and ways in which they differ from original Revere Ware parts.
-
Pan/skillet 2-screw handle hardware set (med, lg, x-lg handles)
DetailsMaterial: Stainless steel
Includes: Two nuts, two screws, and a hanging hook
Fits: Vintage era medium, large, and x-large skillet and pan handles (definition of skillet, pan, etc. here). These fit Revere Ware pans with handles that have two screws through the Bakelite.
If you are looking for a new hardware set for your 2-screw Revere Ware handle, this is mostly likely the one you need; this set fits 99% of all the 2-screw handles. This hardware set is specifically made for the medium, large, and x-large sized handles. We also sell a small hardware set which only fits the small handle; the small handle fits very very few cookware pieces.
Please see the detailed information about this part to see any special considerations for this part and ways in which they differ from original Revere Ware parts.