Top Menu

6-in

The recommendations for handle size based on the measurements of your skillet are suggestions only.

To insure a proper fit, please check the the stated measurements for our parts against your existing handle. Specifically, check the measurements of the Bakelite part of the handle, the distance between the centers of the holes, and the size of the metal spline the handle goes on to insure a proper fit. The spline measurements and the distance between the holes are the most critical measurements to pay attention to.

Showing all 3 results

  • Lid knob

    Lid knob

    Material: Bakelite, brass

    Includes: Bakelite knob with brass screw insert.  A separate screw is NOT included as all Revere lids have a screw attached to them.

    Measurements: 1.7 in (43 mm) diameter, 0.75 in (19 mm) tall

    Fits: All Revere Ware lids, vintage era and newer that have a similar looking knob.  This knob may not fit Revere Ware lid styles that have a different looking knob.

    Details
    $6.49 Add to cart
  • Small 2-screw pan handle

    Small 2-screw pan handle

    PLEASE DO NOT ORDER THIS HANDLE SIZE UNLESS YOU ARE SURE IT WILL FIT YOUR PAN!  SEE THE MEASUREMENTS BELOW (ESPECIALLY THE SPLINE SIZE).  THIS SIZE FITS VERY FEW PAN SIZES.

    Material: Bakelite, stainless steel

    Includes: Two handle halves + hardware set

    Measurements: 4.5 in (115 mm) long, 2.75 in (70 mm) between holes on center.  See the full details for more information on determining the proper size handle, or download and print our sizing sheet on an 8 1/2 x 11 (letter size) sheet of paper.

    Fits: Vintage era 6 in skillets, and possibly others (definition of skillet, pan, etc. here).  These fit Revere Ware pans with handles that have two screws through the Bakelite.

    These fit a limited number of pans/skillets and fit a 3/8 in metal spline that is smaller than the 5/8 (medium handle) or 3/4 in spline (large, x-large) most Revere Ware skillets and pans have.  Please make sure your pan has the smaller spline these handles are made for.

    Please see the detailed information about this part to see any special considerations for this part and ways in which they differ from original Revere Ware parts.

    Details
    $11.99 Add to cart
  • Pan/skillet 2-screw handle hardware set (small handles)

    Pan/skillet 2-screw handle hardware set (small handles)

    Material: Stainless steel

    Includes: Two nuts, two screws, and a hanging hook

    Fits: Vintage era small pan handles (definition of skillet, pan, etc. here).  These fit Revere Ware pans with handles that have two screws through the Bakelite.

    These will only work with the small two-screw vintage style handle.  These screws and nuts will not fit in the larger handle sizes or the single screw newer handle. Only 1% or less of the Revere Ware cookware requires the small handle. If you think you have a small handle, please check it against the measurements of our small handle before ordering this hardware set.

    Please see the detailed information about this part (the “See details” link under the images) to see any special considerations for this part and ways in which they differ from original Revere Ware parts.

    Details
    $4.99 Add to cart